We show the government's numbers as published. Yearly pay is the hourly figure times 2,080 hours. Nothing is modelled or guessed. The U.S. comparison uses the national median for the same job code.
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.
Content hash 2e9921aa · first dealt Nov 16, 2026 · last changed Nov 16, 2026
Petroleum Pump System Operators, Refinery Operators, and Gaugers in Connecticut earn a median of $56,880 a year, according to the U.S. Bureau of Labor Statistics survey for May 2025. Half earn between $46,760 and $76,790. The lowest-paid tenth earn under $46,070 and the highest-paid tenth earn over $100,340. These are government survey figures, not estimates from ads.
Checked Nov 16, 2026Source: U.S. Bureau of Labor Statistics
Reading the Numbers
Worked out from the published figures on this card. Nothing here is an estimate.
The median here is 41% below the national median of $96,710 for the same job.
The middle half of workers earn between $46,760 and $76,790, a band $30,030 wide.
Pay at the 90th percentile ($100,340) is 2.2 times pay at the 10th ($46,070).
The average (mean) is $65,190, 15% above the median. An average above the median means a smaller group of high earners pulls it up.
What Petroleum Pump System Operators, Refinery Operators, and Gaugers Do
Operate or control petroleum refining or processing units. May specialize in controlling manifold and pumping systems, gauging or testing oil in storage tanks, or regulating the flow of oil into pipelines.
Common job titles: Board Operator, Crude Unit Operator, Gauger, Hydrotreater Operator, Operator, Outside Operator, Pumper, Refinery Operator, Stillman, Unit Operator.
What the Work Involves
The five tasks that workers and experts surveyed by O*NET rate most important for this job, most important first.
Signal other workers by telephone or radio to operate pumps, open and close valves, and check temperatures.
Maintain and repair equipment, or report malfunctioning equipment to supervisors so that repairs can be scheduled.
Monitor process indicators, instruments, gauges, and meters to detect and report any possible problems.
Start pumps and open valves or use automated equipment to regulate the flow of oil in pipelines and into and out of tanks.
Operate control panels to coordinate and regulate process variables such as temperature and pressure, and to direct product flow rate, according to process schedules.
Education. 97% of workers surveyed by O*NET said the level required for this job is: High School Diploma or the equivalent.
Preparation This Job Usually Needs
Job Zone 1-2: Very Little to Some Preparation Needed. Usually requires a high school diploma or GED, though some occupations may not. Ranges from a few days to one year of on-the-job training. Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.
This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.