Search job, employer or placeSearch cards/Check an Offer
SalaryNo.S-145556

Sheet Metal Workers

Fresno, CAGovernment job code 47-2211

Market pay · all workers · BLS, May 2025

$73,860median pay per year · $35.51 an hour
10th
$45,120
25th
$59,030
Median
$73,860
75th
$107,920
90th
$128,360

Small sample: BLS marks this estimate as less reliable, so treat the figures with care.

Government wage levels · wage year 2026-27

Level I
$51,085
Level II
$66,165
Level III
$81,224
Level IV
$96,304

The four pay levels the Department of Labor sets for this job in Fresno, CA. Yearly figures are the hourly level times 2,080 hours.

Filed pay

Fewer than 10 certified full-time filings for this job here, so there is no filed-pay figure.

People in this job here
200
Against the U.S. median
+20%
Mean pay per year
$81,390
Source: U.S. Bureau of Labor Statistics, May 2025 data · checked Nov 16, 2026
SourcesNo.S-145556

Where This Card Comes From

We show the government's numbers as published. Yearly pay is the hourly figure times 2,080 hours. Nothing is modelled or guessed. The U.S. comparison uses the national median for the same job code.

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.

Content hash 86722c41 · first dealt Nov 16, 2026 · last changed Nov 16, 2026

Save as Image Compare

jobs.cards/c/S-145556

What Does This Job Pay in Fresno, CA?

Sheet Metal Workers in Fresno, CA earn a median of $73,860 a year, according to the U.S. Bureau of Labor Statistics survey for May 2025. Half earn between $59,030 and $107,920. The lowest-paid tenth earn under $45,120 and the highest-paid tenth earn over $128,360. These are government survey figures, not estimates from ads.

Checked Nov 16, 2026Source: U.S. Bureau of Labor Statistics

Reading the Numbers

Worked out from the published figures on this card. Nothing here is an estimate.

  • The median here is 20% above the national median of $61,800 for the same job.
  • It is 4% below the California median of $76,590.
  • 200 people hold this job here, 0.2% of the 119,770 who hold it across the country.
  • Of every 1,000 jobs here, 0.42 are this job, which makes it 46% less common here than in the U.S. as a whole.
  • The middle half of workers earn between $59,030 and $107,920, a band $48,890 wide.
  • Pay at the 90th percentile ($128,360) is 2.8 times pay at the 10th ($45,120).
  • The average (mean) is $81,390, 10% above the median. An average above the median means a smaller group of high earners pulls it up.
  • By the hour, the published median is $35.51.
  • The market median of $73,860 meets government wage Level II for this job and area (wage year 2026-27).

What Sheet Metal Workers Do

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

Common job titles: Commercial Sheet Metal Service Installer, Field Installer, HVAC Sheet Metal Installer (Heating, Ventilation, and Air Conditioning Sheet Metal Installer), HVAC Sheet Metal Specialist (Heating, Ventilation, and Air Conditioning Sheet Metal Specialist), Sheet Metal Fabricator, Sheet Metal Installer, Sheet Metal Journeyman, Sheet Metal Layout Mechanic, Sheet Metal Mechanic, Sheet Metal Worker.

What the Work Involves

The five tasks that workers and experts surveyed by O*NET rate most important for this job, most important first.

  • Inspect individual parts, assemblies, or installations, using measuring instruments, such as calipers, scales, or micrometers.
  • Maintain equipment, making repairs or modifications when necessary.
  • Fabricate ducts for high efficiency heating, ventilating, and air conditioning (HVAC) systems to maximize efficiency of systems.
  • Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
  • Transport prefabricated parts to construction sites for assembly and installation.

Education. 49% of workers surveyed by O*NET said the level required for this job is: High School Diploma or the equivalent.

Preparation This Job Usually Needs

Job Zone 1-2: Very Little to Some Preparation Needed. Usually requires a high school diploma or GED, though some occupations may not. Ranges from a few days to one year of on-the-job training. Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA.

Embed This Card

Paste this where you want the card to appear. It stays up to date.